Hi everyone,
Sergey "Dorodnic" Dorodnicov, the RealSense SDK Manager, has released a blog post discussing basic concepts of stereoscopic vision.
↧
Intel blog post on the basics of stereoscopic vision
↧
Re: Optane 905p file carving digital forensics
You are 100% right. I concluded for myself that HDD RAID5 not as system drive will profit of Optane. Now when I read my response again, I might not have translated it not correctly in English language.
The part with NVME system disk is clear. Also about write speed. I conclude again for myself:
If I have a large imaga file on a RAID5 (HDD), let's say 1500GB cutted in 2GB peaces, which need to be carved by forensic software, the optane drive might not help that much because there are no common files. Right?
The software itself might be fast enought already, if run on an NVME drive. Only the cache drive, if the software support this, could be an optane. Right?
I ask this all, because processing that large files takes many hours or even days. So a speed boost cuts down the time and saves money.
I don't want to upset you in any way. Sorry if I have done.
↧
↧
Re: I210 Teaming after Windows 10 April 2018 Update
Hi Ricoc and Morpheus82,
Thank you for the information, we will further investigate.
Regards,
Sharon T
Intel Customer Support
Agent under contract to Intel
↧
Re: no response yet from ASRock on bios
Tried a few more times after getting some advice from Steve Simmons (a fellow poster). Thought I have everything setup but still unable to enable optane. See attached screenshots, I have BIOS with pre-OS RST 16 driver. All physical disks set to non-raid. Left unallocated space of 50G at end of disk (right hand side in disk manager view?) for both EVO 970 OS disk as well as SATA HDD disk just in case. See attached photo of error message I can (incompatible disk with unknown problem !!). Not sure what else I should try. Seem strange to me both System OS disk and Optane memory are on the same port number 0. Can you help please.
↧
Re: How to know xeon gold 6126 processor's turbo steps..
Hi Miguel C,
Thanks for the reply, as I mentioned in the description; I already have that information which you shared.
I am looking for number of turbo steps as I furnished the table of v4 processor (looking for centre column numbers for 6126).
Thanks,
Ashok Kumar Pakki
↧
↧
MobileDemand release rugged tablets with RealSense D415 option
Hi everyone,
In July 2018, MobileDemand are releasing a rugged Windows tablet, the xTablet T1270, with the RealSense D415 as an option.
https://www.ruggedtabletpc.com/products/xtablet-T1270
Also coming is the T1150 Intel Atom model with D415.
https://www.ruggedtabletpc.com/products/xTablet-T1150
Further details about how MobileDemand is using the D415 can be found here:
https://www.ruggedtabletpc.com/blog/3d-camera-for-rugged-tablet
MobileDemand will also be offering the option of attaching D415 to more of their tablet models, or to their brand of Surface and iPad Pro cases, via a protective boot.
https://www.ruggedtabletpc.com/products/rugged-ipad-case
* Please note that the RealSense 400 Series cameras and their RealSense SDK 2.0 software are not currently supported on iPad.
↧
Re: RMM4 module not working
Hello Vityas,
Please try to perform it with the following order:
Install first:
1. https://downloadcenter.intel.com/download/26957/Intel-Server-Board-S2600CP-Firmware-Update-Package-for-EFI?product=56334
Then:
2. https://downloadcenter.intel.com/download/27786/Firmware-Update-Package-Update-for-EFI-Intel-Server-Boards-and-Intel-Server-Systems-Based-on-Intel-60X-Chipset?v=t
Then test the KVM again.
Let me know how it goes.
Regards,
Charlie_Intel
↧
Re: Microcode revision 0x32 for CPUID 506C9?
Scott Pearson wrote:
RE: Can safely be assumed that Meltdown is fixed by the microcode update when reported as this, and microcode updated early by Linux?
No! The microcode fixes specifically address only Spectre Variants 2 & 3. They DO NOT address Meltdown! Meltdown is addressed by specific workarounds introduced at the O/S level.
...S
Meltdown and Spectre Variant 3 mean the same: Rogue Data Cache Load (RDCL) CVE-2017-5754 .
So: Microcode fixes potentially address also Meltdown.
With the latest microcode revision 0x32 (Apollo Lake CPUID 506C9) RDCL_NO is set when loaded early by the Linux kernel (but not by BIOS).
The issue is that the kernel disables PTI mitigation for Meltdown then. Therefore the question:
@Intel support: Can safely be assumed that Spectre Variant 3 (Meltdown) is fixed when the microcode update 0x32 for CPUID 506C9 is updated early by Linux?
↧
Very poor performance with UHD630 in WoW after latest patch (BFA addon)
So... Blizzard has removed fullscreen mode with the latest World of Warcraft patch (upcoming BFA addon) and goes for DX12. Only windowed mode and "fullscreen" windowed mode are still supported. After this chance, I can't get more than 20-35FPS anymore in WoW on my laptop with UHD630. Before in fullscreen mode,I had flawless 60FPS on low settings and could easily play WoW on my laptop.
It seems UHD630 isnt able to use windowed mode properly. DX12 doesnt support fullscreen render mode anymore it seems, though UHD630 is stated as DX12 compatible.
So whats the culprit here? Bug in Intel drivers? In Windows 10? I dont think the problem lies in WoW. This is a huge issue and makes playing WoW literally now broken on Intel iGPUs.
The laptop has Optimus too with Nvidia GTX1050Ti, and switching to the Nvidia card also shows now a massive performance drop in WoW. It shows both GPUs are being used for whatever reason, Intel GPU usage next to the Nvidia one is also 60%. This change seems to have also impact on Optimus based solutions.
Very low FPS due do Fullscreen windowed mode - World of Warcraft Forums
↧
↧
Re: Intel NUC7PJYH Unable to Boot
Hello Ben,
You should ask your question in a new thread. You have not informed what is a P/N of your RAM.
Any way try to recover bios from Power Button Menu:
- Prepare USB stick fully formatted to FAT32 (disable quick format option during format). Format your USB on Windows machine (rather than Linux or MAC). Save the Bios file JY0041.bio (Download BIOS Update [JYGLKCPX.86A] ) on this stick and insert it into USB slot (NUC shall be OFF).
- Press Power Button for about 3 seconds. You should release the Power Button soon as the power led changes color from blue to amber. NUC will reboot into Power Button Menu.
- Press F4 and the recovery shall start (it can take up to 30 seconds for messages to appear on the screen).
- When the recovery finishes, pull out the power cord.
- Replace the power cord and press Power Button to switch the computer to ON.
- Enter Bios setting by pressing F2 during boot process.
- Press F9(followed by "Y"), to set Bios to default settings. Press F10 (followed by "Y"), to save the settings and exit to O.S. Let the NUC fully reboot.
- You can enter again to Bios setting to change the necessary settings.
Note:
If for some reason you have difficulty to boot into Power Button Menu, you shall recover your Bios using Security Jumper method BIOS Recovery Update Instructions for Intel® NUC
Leon
↧
Copy process / connection break down when sending files over 9260 card
I have the following issue with an Intel 9260 wifi card. The moment I send (larger) files into the LAN (for example samba or Windows 10 network share), the copy process of Windows explorer (with a high chance, does not happen every time, but with a very high chance):
- goes to 0kb/s then jumps up again after some time or
- Windows gives an internal network error (Wifi driver seems to crash)
While this happens, and having a permanent ping open next to the copy, the moment the copy breaks down, the Acces Point isn't reachable anymore:
The images show, that after 1-2 seconds of the copy process, the copy rate drops to 0, in this moment the access point isn't reachable anymore via ping. If I'm lucky, like in this picture, after a short period of time, it goes slowly up again. But I also had it happen too now very often, that the ping breaks down into "internal network error" and the copy process is abrupted. The wifi driver mostly crashes at this moment, and Windows tries to reload the driver.
I tried two access points, and it happens on both of them, so the issues seem to lay in the Intel card or its drivers. I am using the latest available drivers for the 9260 card and Windows 10 64bit, version 20.60.0.
Receiving files work without an issue, from the LAN to the 9260 card. This issue just happens, when I send away files from the laptop, into the LAN.
The connection is 866Mbit (2x80Mhz). I tried two separate access points, both show the same behavior.
Edit:
I just noticed that I can randomly crash the Access Point by this (after some tries, copying a large file over the LAN, the access point would restart randomly)
I can see this behavior on two different routers/access points. One is a Linksys WRT1200, another a totally different model and brand by a totally different manufacturer (AVM FRITZ!WLAN Repeater DVB-C).
↧
Re: 82574l gigabit adapter limited to 100Mbps
Hello Saravana_CSB,
Thank you for posting in Intel Wired Ethernet Communities. This issue involves an embedded Ethernet controller. Have you checked with Intel Embedded Community on this issue? Please ask in Intel Embedded Community for assistance. Please let us know if you have any other questions.
Best regards,
Daniel D
Intel Customer Support
Agent under contract to Intel
↧
Re: XL710 QDA2 link not detected.
Hello Prakashkurup7,
We would like to help you with this issue. Please inform us if you have not resolved the issue. If you have any questions please let us know..
Best Regards,
Daniel D
Intel Customer Support
Agent under contract to Intel
↧
↧
Re: "Present Screen" video issue on hub.
Hello,
i installed latest Intel Unite app version and issue still exist.
I am looking forward for any help.
Krzbes
Computer Profile Summary
| Computer Name: | XPR20611 (in WORKGROUP) |
|---|---|
| Profile Date: | poniedziałek, 23 lipiec 2018 12:15:14 |
| Advisor Version: | 8.6 |
| Windows Logon: | Administrator |
| Windows 10 Professional (x64) Version 1803 (build 17134.167) Install Language: Polski (Polska) System Locale: Polski (Polska) Installed: 23.07.2018 12:06:25 Servicing Branch: Current Branch (CB) Boot Mode: UEFI with Secure Bootdisabled |
| Asset Tag: Default string Chassis Serial Number: Default string Enclosure Type: Desktop |
| 3,40 gigahertz Intel Core i5-7500 256 kilobyte primary memory cache 1024 kilobyte secondary memory cache 6144 kilobyte tertiary memory cache 64-bit ready Multi-core (4 total) Not hyper-threaded |
| Board: ASUSTeK COMPUTER INC. PRIME H270-PRO Rev X.0x Serial Number: 171115516100814 Bus Clock: 100 megahertz UEFI: American Megatrends Inc. 1205 05/03/2018 |
| 499,46 Gigabytes Usable Hard Drive Capacity 472,76 Gigabytes Hard Drive Free Space Samsung SSD 860 EVO 500GB [Hard drive] (500,11 GB) -- drive 0, s/n S3Z2NB0K374466A, rev RVT01B6Q, SMART Status: Healthy |
| 16328 Megabytes Usable Installed Memory Slot 'ChannelA-DIMM1' is Empty Slot 'ChannelA-DIMM2' has 8192 MB (serial number 1C33ACFC) Slot 'ChannelB-DIMM1' is Empty Slot 'ChannelB-DIMM2' has 8192 MB (serial number 1C33AE99) |
|
| None detected |
| ||||||||||||||||||||||||
|
| Intel(R) 300 Series Chipset Family SATA AHCI Controller |
| NVIDIA GeForce GTX 1050 [Display adapter] BenQ GL2250H [Monitor] (21,7"vis, s/n N1G00734019, styczeń 2016) |
| Kontroler miejsc do magazynowania firmy Microsoft ASMedia USB 3.1 eXtensible Host Controller - 1.10 (Microsoft) Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft) |
| NVIDIA High Definition Audio Realtek High Definition Audio |
|
| None detected |
| ||||||||||||||||||||||||||||||
| BenQ GL2250H-4 (NVIDIA High Definition Audio) Realtek Digital Output (Realtek High Definition Audio) Systemowe oprogramowanie układowe Urządzenie wejściowe USB (2x) Urządzenie klawiatury HID [Keyboard] Mysz zgodna z HID [Mouse] Fax Główna kolejka wydruku Microsoft Print to PDF Microsoft XPS Document Writer Microsoft Radio Device Enumeration Bus Syntezator SW Microsoft GS Wavetable Główny koncentrator USB (USB 3.0) (2x) |
| None detected |
| None detected |
|
Hotfixes from Windows Update (agent version 10.0.17134.137) install automatically. Last install: 23.07.2018 11:55:55, check: 23.07.2018 12:14:00. All required security updates have been installed (using Advisor definitions version 2018.7.13.2) according to the 07/10/2018 Microsoft Security Bulletin Summary and bulletins from other vendors. |
|
|
↧
Predictive Failure on power Supply
Hi,
I'm using a S2600CP server board. The integrated BMW Web Console is reporting power supply warnings on a monthly base.
The server has 2 power supplies, one connected to the net the other one is connected to a ups.
Both power suppliers are generating the same warning (at the same time):
Event that generated this alert:
RID:02B2 TS:07/21/2018 09:01:02 SN:PS2 Status ST:Power Supply ED:Predictive Failure ET:Asserted EC:Non-Critical
RID:02B2 RT:02 TS:5B52F64E GID:0020 ER:04 ST:08 S#:51 ET:6F ED:A2 06 30 EX:01 FF FF FF FF FF FF FF
Event that generated this alert:
RID:02B1 TS:07/21/2018 09:01:02 SN:PS1 Status ST:Power Supply ED:Predictive Failure ET:Asserted EC:Non-Critical
RID:02B1 RT:02 TS:5B52F64E GID:0020 ER:04 ST:08 S#:50 ET:6F ED:A2 06 30 EX:01 FF FF FF FF FF FF FF
The BMC warning indication keeps blinking and the Server Health reports a warning:
| Pwr Unit Redund | reports full redundancy has been regained | Warning | 0x0001 |
The BMC version:
| BMC FW Rev : | 01.21.6038 |
The event generated looks like a false event, but i'm concerned about the Pwr Unit Redund warning.
What can cause this warning?
Thanks in advance,
Davy
↧
Re: Additional datasets request
Hi
Could you please let us know if the above solution helped for you?
Thanks
↧
Re: how to install pytorch in a new conda env or steps to use the default one
Hello,
As we haven't received any response we are closing this ticket. Feel free to open a new thread in case you face any further issues.
↧
↧
Re: What are the GPU specifications provided in 1 month AI-cloud colfax research program?
Hi ,
As we haven't received any response we are closing this thread.
If you have any other issue,Please raise a new thread
Thanks
↧
Re: Job crashes, error file is empty
This wasn't the case.
As I mentioned before, the job, when exeucted on Jupyetr terminal, terminates after few seconds (way before the time limit of the session).
Also,
when executing the jobe as we discussed yestereday,
I obtained a quota execceded error,
which I dont get when using the jupyter notebook/terminal.
↧
Jupyter hub crashes when running multiprocessing (6cores) script
Hi, I'm running a very simple script,
however the entire system crashes after 2-3 minutes of running.
import os
import json
import pandas
import sys
import multiprocessing as mp
def jsons2df(path):
json_list=[]
file_list = os.scandir(path)
counter=0
error_counter=0
for j_file in file_list:
counter+=1
if counter%10000==0:
print(counter)
#with open(os.path.join(path,j_file),"r") as j:
with open(j_file.path,"r") as j:
try:
data = json.load(j)
except:
print("ERROR: ",j_file)
error_counter+=1
if error_counter>1000:
break
else:
continue
json_list.append(data)
try:
json_df= pandas.DataFrame(json_list)
b=json_df["url"].apply(lambda x: x.split("/")[2])
json_df['domain']=b
return json_df
except:
return json_list
def get_and_extract(number):
print("starting: ",number)
if not os.path.isfile("%s.tar"%(number)):
if not os.path.isdir("%s"%(number)):
if not os.path.isfile("./pickles/wiki_%s.pickle"%(number)):
print("downloading")
url="http://data.dws.informatik.uni-mannheim.de/webtables/2015-07/englishCorpus/compressed/%s.tar.gz"%(number)
os.system("wget %s"%(url))
print("extracting gz #1")
os.system("tar -xzf %s.tar.gz >/dev/null"%(number))
os.system("rm -rf %s.tar.gz"%(number))
if os.path.isfile("%s.tar"%(number)):
print("extracting tar #2")
os.system("tar --skip-old-files -xf %s.tar >/dev/null"%(number))
os.system("rm -rf %s.tar"%(number))
if not os.path.isfile("%s.tar"%(number)):
if number.startswith("0"):
number=number[1:]
path="./%s"%(number)
if not os.path.isfile("./pickles/wiki_%s.pickle"%(number)):
df =jsons2df(path)
print("pickling:")
df.to_pickle("./pickles/df_%s.pickle"%(number))
b=df[df.domain.str.contains("en.wikipedia.org")]
b=b[~b.url.str.contains('Special:Book')]
b.to_pickle("./pickles/wiki_%s.pickle"%(number))
if os.path.isdir("%s"%(number)):
print("Deleting:")
os.system("rsync -r --delete emptydir/ %s/"%(number))
os.system("rmdir %s"%(number))
print("Done: ",number)
#get_and_extract(number)
def main(number1,number2):
#pool=mp.Pool(CORES)
pool = mp.Pool(6)
print(number1,number2)
print("Looping:")
for i in range(int(number1),int(number2)+1):
print(i)
x =str(i)
y=0
x =str(i)
y=0
a=pool.apply_async(get_and_extract,(x,))
#a=pool.apply_async(get_and_extract,(x,))
#print(a)
pool.close()
"""
if __name__ == '__main__':
number=sys.argv[1]
number2=sys.argv[2]
main(number,number2)
"""
↧